Elev8's Baller Series Heater - Ruby Ball Conversion kit for SSV (Silver Surfer Vehicle) is the ultimate upgrade for your Super Surfer Vehicle (SSV). With just under 200 x 3mm ruby balls, this kit adds some airflow restriction, improved flavour and smoother vapor. It also provides epic vapor production with reduced temperature settings for a massive increase in efficiency. This allows for faster extractions and a much higher possible maximum temperature!
This kit converts the SSV into a fully fledged ball vape, increasing the vapor production by almost an order of magnitude (probably... it's a lot, it's hard to express how much more!). This is highly recommended for people who like thicker clouds and higher temperatures! For many people leaving your SSV on the lowest setting will now provide full satisfaction... and we never run this setup higher than 12 o'clock on the dial! Like most people we previously ran the SSV close to or at max power in its original format, to provide a comparison.
Available in two styles, we have the Spherical joint heater cover and the Conical joint heater cover for those of you with fatty conical wands or using DBV conical wands with your SSV. The Conical Baller Series heater cover is currently exclusive to Recommended Vape Supplies, requested specifically for our customers with conical wands!
Having a glass housing, Ruby balls and an Alumina Ceramic heater, the Baller Series Conversion Kit provides an airflow path which would be considered very pure, with the mesh screen being the only metal part! Prepare yourself for huge amounts of super clean and tasty vapor! The flavour is one of, if not the best we've come across from any vaporizer!
Simply remove your old housing, put the new one in place, then carefully pour your balls in. When the heater has just been covered, pop the Glass Cap on the Heater Housing and you're good to go! Initial pre-heat takes around 10 minutes, or you can turn it up to max for 5 mins, then reduce the temp to 10 or 11 o'clock on the dial and leave it for a couple of minutes to drop down.
Specifications
- 1 x Elev8 Premier crafted borosilicate Baller Series heater cover
- Heater Cover available in Spherical (original) or Conical
- 1 x Elev8 Premier crafted cap
- 200 x 3mm Lab Ruby balls (more than enough)
- Improved flavour (insanely good)
- Huge upgrade in Vapor Production
- Reduced temp settings for improved efficiency
- Higher possible temperatures
- Smoother Vapor
- Compatible with the original Spherical Wands or Conical Wands (please select the relevant cover you desire)
- Never add or remove ruby balls if the unit is hot, or even warm.
- When adding the new heater cover, make sure your Surfer is turned off, unplugged and cold
- Never touch the heater housing unless it is completely cool
- Don't overfill, you need to be able to place the cap on without any force, remove a few balls if you need to!
Handmade by Elev8
Listing is for ball conversion kit only.
If you ever need to adjust your housing, always remove the balls first or you risk damaging the heater cover and heater due to the balls being packed inside!