The Infinity Stem by TS Wooden Art is a multi part cooling stem designed to be used with the Battery Free Ganz and DynaVap vaporizers. They are designed primarily for the Dani Fusion (not the new Dani Punch) vapes but can also be used with DynaVap, for DynaVap o-rings are provided to replace the ones currently on your DynaVap Tip.
Made with sustainably sourced handcrafted Rosewood, borosilicate glass, Stainless Steel and Titanium these stems not only function very well but look incredibly stylish.
To use the Infinity Stem you install your Dani Fusion or DynaVap tip into the joint of the stem, heat and inhale! That's it! Just kidding (although it is that simple, I'm sure that's not enough information to satisfy). Bear with me though because most of these parts don't have names! (Yes there's some copy/paste involved in the TS Wooden Art product listings since there's a lot of similar functionality, don't hate me!).
The Tip is installed into the stainless steel lined Rosewood joint, which has an adapter on the other side for the glass stem section. This is where it gets really nifty... the glass tube attaches to the previous part and contains a wood particle blocker which also directs the vapor towards the glass for cooling. This particle blocker is attached to a small stainless steel tube which contains a Titanium helix to help cool the vapor further. This tube then fits inside the Titanium mouthpiece and voila, the vapor is now inside you!
Specifications
- Made from sustainably sourced Vietnamese Rosewood
- Borosilicate Glass adapter and stem
- Stainless Steel internal tubes and joints
- Grade 2 Titanium Cooling Helix and Mouthpiece
- Approx. 30 grams
- Approx. 100mm long
What's included - Infinity Stem
- Infinity Stem
- Spare o-rings
Also Available Separately
- 1 x Replacement Glass Stem
- I know it may sound silly since we're a retailer, but please only grab these replacement parts if you need one since we can't stockpile these parts and it'd suck if someone had one sitting in a drawer while someone else had to wait for us to restock to get their poker back up and running!
Cleaning
Do not wipe or soak the wood in water or liquid and always keep the wood surface dry, just wipe the outside with a soft cotton cloth with beeswax or carnauba. The inside of the wood has not been treated
To clean the stem you disassemble it, soak the metal and glass parts in ISO or clean them out with ISO on q-tips. The inside of this stem is fully lined with metal or glass so the only part inside which needs extra care is the wood particle blocker which can be wiped down with a little cotton wool sprayed or lightly covered with ISO. We have a video showing the cleaning process but it's too large to leave here. So if you'd like one please drop us a message with your whatsapp number and that'll be sent over!
Being a natural product, the wood grains and colours will differ somewhat between pokers. The one you receive will always look a little different from the one photographed. Please note this is not a vaporizer! The Dani Fusion tip installed in one photo is for illustrative purposes and is not included.