TinyMight Infinity Stem - TS Wooden Art

The TinyMight Infinity Stem by TS Wooden Art is a multi part cooling stem designed to be used with the TinyMight and TinyMight 2 vaporizers. Made with sustainably sourced handcrafted Rosewood, borosilicate glass, Stainless Steel and Titanium these stems not only function very well but look incredibly stylish. There are both long stems and short ones available, the short one mostly sits inside the device, the longer one with better cooling pokes out a fair bit as shown in the photos. 

To use the Infinity Stem you just pop some herb in as you would with your regular TinyMight stem, heat and inhale! That's it! Just kidding (although it is that simple, I'm sure that's not enough information to satisfy). Bear with me though because most of these parts don't have names! (Yes there's some copy/paste involved in the TS Wooden Art product listings since there's a lot of similar functionality, don't hate me!).

The herb chamber is made from borosilicate glass and comes with a mesh screen section installed, there are also mesh basket style screens available which can either replace or be used in combination with the original screen. We prefer the basket style screens as they provide a slightly better cook of the herb right to the edges, though the difference here is marginal. You can also use the Microdose Diffuser Bowl Screens if you already have some (or would rather use them instead) and don't mind opening them up a little bit, as standard they're slightly less wide than they need to be for this stem. 

This is where it gets really nifty... the glass stem contains a wood particle blocker which also directs the vapor towards the glass for cooling. This particle blocker is attached to a small stainless steel tube which contains a Titanium helix to help cool the vapor further. This tube then fits inside the Stainless Steel lined Rosewood mouthpiece and voila, the vapor is now inside you! For the longer stem there are also soft glass balls in between the screen and wood particle blocker, these provide additional particle capture and vapor cooling. 

• Please be aware that the TM Infinity Stem has been slightly adjusted for the new batch and now uses a slightly wider internal diameter glass stem. The mouthpiece and internals have been made slightly wider, so please do not use a newer mouthpiece with an older glass stem. - Stems purchased after 05.06.2026 use the new wider mouthpiece and internals. 

These stems may not stay put in the new TinyMight 2 Black Edition, this new version seems to have a slightly larger internal diameter, we're trying to get specifications for the internal diameter for the new device to double check this since we don't have one here. If you happen to have one of these and a set of measuring calipers, hit us up with the outer diameter of the TM2 Black Edition Stem please and thanks! 

Specifications

• Made from sustainably sourced Vietnamese Rosewood (Mouthpiece)
• Borosilicate Glass stem
• Stainless Steel internal tubes and joints
• Grade 2 Titanium Cooling Helix 
• Soft Glass Balls (long stem only)
• Long Infinity Stem
  • Approx. 29 grams
  • Approx. 100mm long
• Short Infinity Stem
  • Approx 21 grams
  • Approx 70mm long

What's included - Infinity Stem

• Infinity Stem for TinyMight or TinyMight 2

Also Available Separately 

• 2 x Mesh Basket Screen
• 1 x Replacement Glass Stem for Infinity Stem 
  • Please be aware that the TM Infinity Stem has been slightly adjusted for the new batch and now uses a slightly wider internal diameter glass stem. The new replacement glass stems now come with some additional o-rings packed inside. So if you have an infinity stem purchased before 05.06.2026 you may need to switch the mouthpiece and Stainless Steel screen holder o-rings over to the ones which come with the new replacement stems. The mouthpiece and internals have been made slightly wider, so please do not use a newer mouthpiece with an older stem. 

Cleaning

Do not soak the wood in water or liquid and always keep the wood surface dry, just wipe the outside with a soft cotton cloth with beeswax or carnauba. The inside of the wood has not been treated 

Cleaning Video by TS Wooden Art

Condenser Assembly Video by TS Wooden Art

To clean the stem you disassemble it, soak the metal and glass parts in ISO or clean them out with ISO on q-tips. The only part inside which needs extra care is the wood particle blocker which can be wiped down with a little cotton wool sprayed or lightly covered with ISO. We have a video showing the cleaning process linked above.

Being a natural product, the wood grains and colours will differ somewhat between individual stems. The one you receive will always look a little different from the one photographed. Please note this is not a vaporizer! Other parts shown are for illustrative purposes only.