This Terp Tower has been designed for use with the WOHW V2 25mm Barrel Coil. Get the flavour and efficiency that made the terp slurper a favorite. The tall 25mm tower holds heat for smooth, low-temperature dabs and comes with a long pillar to help keep the dabs in contact with the heated central section of the tower while inhaling, distributing heat evenly. It has a 10mm male joint and the 10-14mm glass adapter lets you run it on both 10mm and 14mm rigs.
We suggest setting your temperature no more than 20F higher than your usual vaping temperature and giving the Terp Tower a good 5 minutes to heat initially. You may find that it vapes a little lower temp than you'd like; but especially since Terp Towers are designed to be run at slightly lower temperatures, it's best to start low and increase the temperature as desired.
If you've never used one of this style of banger before, you put the pillar inside and put the cap on before heating it to ensure it heats efficiently. Then when it's hot pop the Terp Tower banger on your bubbler and load the dab into the dish at the bottom and inhale gently. As you inhale the dab will be sucked into the central post area for vaporization. If you'd like to clear the bubbler of vapor before taking another inhale, just remove the glass cap and inhale.
Wipe with a q-tip/swab/cotton bud after each session and soak in ISO to perform full cleans when needed.
Please note that to use this banger you will need to install the Coil Cover on your heater coil, if you don't have one please select that Kit with Coil Cover variant from the menu.
Key Features:
- Terp slurper tower design for maximum flavor and efficiency
- Compatible with WOHW V2 25mm barrel heating coil (with the Coil Cover installed)
- 10mm joint — fits 10mm rigs directly
- Carb cap included
- Pillar included for even heat distribution
- 10-14mm glass adapter — also fits 14mm rigs
- Premium quartz construction
Includes:
- 1 × Quartz 25mm terp tower (10mm joint)
- 1 × Quartz Pillar
- 1 × Cap
- 1 × 10-14mm glass adapter
- Coil Cover (Stainless Steel)
Or
- 1 × Quartz 25mm terp tower (10mm joint)
- 1 × Quartz Pillar
- 1 × Cap
- 1 × 10-14mm glass adapter
Or
- 1 x Quartz Pillar
These setups are also compatible with the Universal Baller 25mm heater coils when in the wireless configuration, with the coil installed on the dock.
This listing is for the Terp Tower or Terp Tower with Coil Cover. Other parts are shown for illustrative purposes only!
