The Ghost Vaporizer is the one that started off the Dr Dabber range, the Ghost 2 is the re-imagining of the initial device fully updated for the modern era. It has now been refined, re-calibrated and revived for the modern dabbers. The Ghost 2 embodies a decade plus of innovative work, painstaking obsession and taking on feedback in the hopes of perfecting the portable dab. We at RecVapeS consider this to be the best all in one mini portable dab machine currently available, it is highly efficient, small, light, with decent battery life and a full ceramic air path.
The Ghost 2 introduces Dynamic Heating Modes, bringing intelligent heat control to the portable wax pen category. These smart power curves automatically adjust in real time according to your draw, ensuring a consistent temperature, richer flavour, and smoother vapour density with every pull. It’s the same adaptive performance you’ll find in Dr. Dabber’s flagship Switch², now in a compact, pocket-friendly device. The Dynamic modes are ascending (temp increasing through the session), descending (temp decreasing through session, like a torch heated banger, or steady (stable temperature).
The Ghost 2 has been designed with a tall and narrow e-Chamber with heated walls, this allows for a compact unit which vaporizes small dabs very efficiently. Just inhale gently and let the device do the work for you! To load it just pick up a small dab with the provided tool, start a session and hold the tool gently against the inside of the heater, allowing it to melt off the dab tool. You can alternatively grab a Mini HDT (heated dab tool) and drop your dab directly into the chamber.
Specifications
- 1 year warranty on the Ghost² battery, charger, and electrical components (e-heater not included - report any faults on arrival)
- Dimensions/ Weight
Height 3.5", Width 1.7", Weight 7oz - Heat Up Time
5-10 Seconds depending on temperature setting - Temperature Range 420-540° F (215-282 Celcius) with 5 pre-set temperatures
- Up to 20 heating cycles on a single charge
- 45-60 minutes for a full charge
- Full Ceramic Pathway for incredible flavour
- Pass through charging using USB-C for fast-charging - Please note that when pass through charging the device still uses the battery for power, so it should have some charge in if you're planning to vape. If you run it completely flat, please charge it for around 15 minutes before leaving it plugged in and starting a vaping session.
- 5 Different Temperature Settings
- Three dynamic heating profiles
Radial Sidewall Heating for Superior Performance
Ghost 2 uses radial sidewall heating, an innovative chamber design that heats your concentrates evenly from all angles. This technology delivers faster heat-up times, bigger vapour output, and complete terpene preservation—meaning no cold spots, no hotspots, and absolutely no burnt hits. Just clean, full-spectrum flavour every time.
Clean, Isolated Vapour Pathway
Dr Dabber engineered the Ghost 2 with a fully isolated vapour pathway, keeping the flavour pure from chamber to mouthpiece. Every inhale is clean, smooth, and uncontaminated, giving you the authentic terp profile of your concentrates without interference. Full ceramic pathway.
Five Precision Temperature Settings
With five carefully calibrated temperature settings, the Ghost 2 lets you customise your sessions exactly how you like them. Enjoy low-temperature flavour dabs, denser cloud production, or anything in between—the Ghost 2’s precision design adapts effortlessly to your preferred style.
Pass-Through Charging for Continuous Sessions
The Dr Dabber Ghost 2 also supports pass-through charging, so you never have to pause a session. Simply plug in and continue vaping while the device powers up. Perfect for daily use, long evenings, or back-to-back sessions with friends.
Better Dabs, Every Time
The Ghost 2 is built for flavour chasers, cloud lovers, and anyone who wants a premium, low-heat concentrate experience in a portable form. Faster heating, cleaner vapour, better terp retention—everything about the Ghost 2 is designed to elevate your dab game.
What's inside the Box?
- Dr. Dabber Ghost 2 Unit
- USB-C Cable
- Metal Dab Tool
What temperature settings does the Dr Dabber Ghost² offer?
The Dr Dabber Ghost² Vaporizer includes five heat settings for flavour or cloud-focused sessions: Lower temperatures enhance flavour, while higher temperatures boost vapour production.
- Purple – 420°F (215C)
- Blue – 450°F (232C)
- Cyan – 480°F (249C)
- Yellow – 510°F (265C)
- White – 540°F (282C)
How to change the temperature on the Ghost²?
- Click the button once to view the current temp setting.
- Click again within 3 seconds to switch to a new temperature.
- The LED will pulse in the corresponding colour.
What are the Dynamic Heating Modes on the Dr Dabber Ghost²?
The Ghost² includes three Dynamic Heating Modes that control how the device heats during each cycle:
- Descent Mode: Temp slowly decreases (mimics natural cooling of a banger).
- Ascent Mode: Temp gradually increases (simulates torching as you inhale).
- Steady Mode: Holds a consistent temperature for the entire cycle.
How do I switch Dynamic Heating Modes?
Click the button 3 times, the LED animations indicate the selected mode:
- Downward = Descent
- Pulse = Steady
- Upward = Ascent
Does the Ghost² remember my settings?
Yes, the Ghost² automatically saves your last-used temperature and heating mode when powering on or off.
How do I load concentrates into the Dr Dabber Ghost²?
- Open the flip-top lid and load ½ a pea-sized amount directly onto the bottom of the e-Chamber.
- Avoid overloading—this restricts airflow and reduces vapour production.
How do I start a heating cycle on the Ghost²?
- Click 2 times to begin
- LED pulses red during heating
- Turns green + vibrates when ready
- Take long, slow draws for best results
- Click the button once during heating to cancel the cycle.
How often should I replace my Ghost² e-Chamber?
e-Chambers are consumable parts and typically last 3–12 months, depending on use and cleaning habits.
Replace if you notice:
- Dark, burnt, or crusted buildup
- Cracks or visible damage
- Burnt flavour
- Leaking
- Poor vapour production
How do I recalibrate a new e-Chamber?
- Turn off the unit and unplug it for 15 minutes.
- Ensure chamber + device are at room temperature.
- With unit off, click 4 times, holding the 4th click.
- Green x3 = Successful
- Red x3 = Unsuccessful (retry after cleaning electrical contacts)
How long does the Ghost² battery last?
- A full charge provides around 20 heating cycles.
- Charging takes about 1 hour.
How do I check the battery level?
Click 4 times while the unit is on:
- Green: 70%+
- Yellow: 30–70%
- Red: Below 30%
How do I clean the Dr Dabber Ghost²?
- Soak the mouthpiece, silicone top & airflow regulator in ISO for up to 20 minutes
- Clean the e-Chamber using cotton swabs (never soak it)
- Let all parts dry for 20+ minutes
- Avoid ISO on the device shell—it may damage the finish.
What do the Ghost² LED fault indicators mean?
- Yellow x3: Faulty chamber connection or dead chamber
- Red x3: Device overheating
- Pink x3: Short circuit or PCB fault
What should I do if the Ghost² isn’t heating?
Check the following:
- Battery charge
- Chamber fully screwed in
- The electrical contacts are clean and not coated in residue
- Chamber integrity - cracks and suchlike
- Recalibration
- Try a new e-Chamber
How do I reset the Ghost² to factory settings?
With the unit off, click 8 times, holding the 8th click until the LED flashes red → green → blue.
Does the Dr Dabber Ghost² have auto-shutoff?
Yes, it automatically turns off after 15 minutes of inactivity to preserve battery life and safety.
What charger should I use for the Ghost²?
Only use the official USB-C charging cable included with the device for best performance and safety.
Can I soak the e-Chamber in ISO?
Never soak the e-Chamber. It will cause permanent damage, clean only with a cotton swab after each session and with a cotton swab dipped in ISO as needed.
The instruction manual can be found here