The Conversion Kit for the Universal Baller by Terp Chasers Club provides the ability to use the Universal Baller housing with a compatible setup such as the Vapvana Ace or the Wireless One Hit Wonder (WOHW). If using it with the WOHW you will also need to purchase the Universal Baller Heater Coil since the WOHW coil is of a different style and not as deep. When used with the Ace Hot Hole you will need to run different temperatures due to the differing fit of the coil to the housing.
When using the UB heater coil the Universal Baller can be used as either a wired or wireless setup and provides the ability to switch between a Titanium or Quartz air path. Please check this link out to see how to change between the different setups! There are other ways the housing can be configured to combine the four main setup types, more information will be added to the above link soon.
Conversion Kit Includes
- Titanium (GR2) Housing
- 2mm Ruby Balls (1000 pcs)
- Wireless Handle
- Glass Bowl (18.8mm Male joint)
- Machined Screen
- Quartz Insert
- Quartz Fritted Disc
- Quartz High Airflow Disc
- Mesh Screen
- Wired Adapter for Housing (to use it wired you will need to purchase the Universal Baller Heater Coil)
Available separately
- Heater Coil for Universal Baller 200w (220v) (Stainless Steel Armoured or regular available)
- 6 Month Warranty against defects
- Confirmed compatibility with Crossing, Vapvana, CH, Auber, Disorderly Conduction (DC) and 710 Coils controllers.
Recommended Temperature Range:
-
Wireless: 490F-610F
- Due to Quartz manufacturing tolerances, each device may have slightly different operating temperatures.
- Quartz setup takes up to 10 minutes to heat from cold, Titanium takes around 5 mins.
-
Wired: 400F-570F
- A heat soak of the bowl for 15-45 seconds will improve performance especially at lower temperatures
Armoured coils have slightly slower initial heat up but are at least as fast to recharge the housing once heated. They are made from SS316 and SS304 and are less likely to leave scratches on the housing due to their smooth interior. They also look slick as hell (see photo)!
These coils are only designed for the Universal Baller housing and may not fit other setups due to their very tight tolerances
Heater and coil compatibility with other setups is not guaranteed, the Universal Baller housing is designed for Universal Baller Bowls. Heater is not compatible with the WOHW stand unless the coil is mounted upside down making the coil guard useless.
If you have a compatible PID controller and just want to run this setup, you may want to consider grabbing one of our Flexi Coils to use for the heater.
Please note that for Germany and Austria shipments including the heater coils may be rejected by customs.