This 25mm Quartz Banger Kit has been designed for both torch heating or for use with 25mm e-nail setups such as the one found on the WOHW. It comes as a full kit with an included quartz insert and spinner carb cap. The banger has been made with a thick bottom to help retain heat better for a more consistent dabbing experience.
Included in the kit is a quartz insert which helps to keep the main banger cleaner, reducing the need for full cleans. We have replacement quartz and Silicon Carbide inserts available separately.
For use with the WOHW we suggest setting the temperature to 560f and leaving it for around 5 minutes to heat from cold before placing it in your rig and loading it with a dab. The temperature can be adjusted from there to your liking. When it's hot, lift the banger on the arm just above the ground glass joint, be careful not to touch the heater or main part of the banger as this will all be very hot.
If used, we suggest 4mm or 5mm terp pearls for this setup. 4mm if using the insert, 5mm if not.
Always remove the banger from the heater coil before switching off your device to avoid it cracking the glass as the setup cools and contracts.
Included
- 25mm OD Banger with 14mm Male Joint
- 25mm Quartz Insert
- Spinner Carb Cap
Spare Quartz Inserts can be found here
Replacement Carb Caps can be found here
Also compatible with 25mm SiC inserts
Please be careful these can get very hot, so check the arm isn't too hot by very gently and briefly touching it where you plan to lift it to ensure when you pick it up you don't get burnt!