The V2 24mm heat sink are an unusual but very effective design for use with 22mm Atomizers such as the Sai TAF, DC V4 Crucible, Quartz Quest/SiC quest and so on. Pleased ensure your mod is compatible with 24mm builds, the original Eleaf Pico is not.
The heat sink itself is 24mm wide, the atomizer screws in and sits just inside the heat sink, only making full contact around the 510 threading. This reduced contact between the heat sink and atomizer makes these far more effective than the traditional design, each heat sink transfers around the same amount of heat into the box mod as two regular heat sinks! The inside of the heat sink is hollow and the base has two fins to dissipate the heat away from the 510 connection. Because the atomizer sits inside the heat sink, overall you end up with a slightly shorter total height from your setup.
Another huge advantage of these heat sinks are the heat dissipation vents in the side, a screwdriver or similar object can be inserted into these holes and used as a lever to unscrew/separate them if they are double stacked or attached firmly to the atomizer. This is in contrast to regular heat sinks which are smooth and extremely difficult to get good purchase on to unscrew them when tightened firmly, especially when double stacked. For the most heat dissipation (and best look) stack these with one regular 22mm heat sink. You cannot stack two of this design together.
- 510 Threaded V2 24mm Stainless Steel heat sink
- For 22mm Atomizers
- Two heat dissipating fins
- Hollow internal for minimal atomizer contact
- Heat dissipating vents/lever points
- Copper 510 contact pin
- Available in Stainless Steel, Black and Pearl/Multicolour
Not suitable for atomizers larger than 22mm.