Turn your HyperDyn into a beast!
The Silver Collar for DynaVap HyperDyn is a conduction based thermal mass enhancer, similar to the FMJ but made from Silver. Silver has been used because this has the highest thermal conductivity of any metal and a low specific heat capacity, meaning it requires less joules of energy to heat up (so heats faster). It allows you to heat the device in one spot (the logo) with a single flame, without rotating it, then vaporize the entire contents of the chamber with one heat cycle (providing you have the lung capacity!). This is possible because the Silver Collar adds a huge amount of thermal mass to the cap, keeping it hot for much longer. You can also use these in an induction heater!
Simply place the Silver Collar around your DyperDyn Cap, give it a squeeze to ensure it makes good contact, then heat the logo using a micro blowtorch. There is no need to rotate/spin the device when using a Silver Collar.
Due to the increased thermal mass your DynaVap will take a little longer to reach the cooling click after use, this is perfectly normal and the speed can be increased by placing it on a cooling magnet such as those in the Reload or the Big Rig Globe Stand.
A final nice little feature of the Silver Collar is the ability to polish them up with the provided buffer, this makes no functional difference but it sure makes them look pretty!
Heating
- The HyperDyn Silver Collar is compatible with single flame micro torches, for faster heating you can use a Yocan Red Torch on low settings or the Blazer FireFox or Stingray which provide an excellent size flame for this setup.
- Heat time depends on the size flame you use so please take this as a general guide only. With the above torches or similar you can heat the Silver Collar for up to 4 seconds past the click on the first heat cycle, then 2-3 seconds on a follow up heat cycle for a full extraction. You can go a little longer and extract in one heat cycle but be very careful as it becomes easy to combust.
- We wouldn't advise heating for more than 5 seconds past the click as the cap can become loose due to thermal expansion
- Always angle your flame around 45 degrees upward to avoid overheating your device while heating the cap
Specifications/Includes
- HyperDyn Silver Collar (designed by and exclusive to RecVapeS in the UK)
- Made from 99.99% (minimum) pure Silver
- Includes Silver Buffer for Polishing (a fine grain file)
- Induction heater compatible - Fits in the Flare induction heater or the Ispire Wand, among others.
Notes
- Before installing the Silver Collar, squeeze is so that the gap is closed, then push it onto the cap, from the bottom of the cap.
- After you have installed the Collar onto your cap, squeeze the sides of the Collar firmly so that the cap grips the tip securely and will not fall off during use!
- During use and over time the surface of the Silver will oxidise and become dull. This is normal and does not need addressing. However you can polish them up as desired to keep them shiny! Your Collar may arrive with some tarnish marks from when it was packed into the bag at the factory, this can be quickly and easily buffed off using the provided buffer/file tool!
- If torch cleaning (not really needed or advised but we know people love a torch clean) do not heat the SC past red hot as Silver melts at just under 1000C and a Butane blowtorch is capable of heating it hotter. This is not an issue for regular use, it takes a larger torch or a very long time, you'd ruin your DynaVap long before and probably melt the hand which is holding it too... Just a safety note, Silver melts innit!
- On a related note these will make your DynaVap hotter than usual after user due to the additional thermal mass provided by the SC. You may need to leave it for a moment between sessions! We suggest removing the cap between sessions where possible.
Listing is for the Silver Collar and file only. Other parts are shown for demonstration purposes.
Please note we randomly fit test these so some may arrive with marks on the inside from our HyperDyn Cap like the one shown in the photos. These have not been used, we just like to double check they're made to specification from time to time.