Pinch Hitter by Vapvana

The Pinch Hitter by Vapvana is a convection (hot air) micro-dose vaporizer designed specifically for small loads and very fast extractions. This makes it a great device for people who want a powerful vaporizer with limited capacity to avoid getting through their herb too quickly. It provides excellent flavour with no compromise on quality. 

Much like the larger Screwball setup the Pinch Hitter comes as a full kit with everything you need included, aside from a bubbler (and herb!). It takes less than a minute to set up and is ready to vape within around 3 minutes from switching it on. 

• Recommended Temperature Range from 500f-600f (260-315C)
• Pinch Hitter Hybrid Bowl holds up to ~.15g of ground herbs
• Bowl comes with 14mm and 18mm glass joints.
• Bowl uses 15mm screens for easy replacements
• Comes pre-installed with rubies, titanium housing, 20mm coil, coil guard, and handle attached. Plug in the coil to the PID, the power cable to the PID, plug it in, turn it on, set the temperature and let it heat up! 
• Please check if your unit is in Celcius or Fahrenheit before turning on (PID instructions at the bottom) to avoid setting a temperature which is far too high or too low

• Note: Picture is for visual reference only. This version will have a branded coil guard.
  

Please check this link to see the Vapvana Quick Start guide, these will be included in the kits in future

Includes

• (1) Assembled Heater* with Handle & Coil Guard Installed (220v Heater for UK/EU)
• (1) Titanium Pinch Hitter Bowl with Handle
• (1) 18mm Glass Bowl Joint
• (1) 14mm Glass Bowl Joint
• (1) PID Temp Controller
• (1) PID Power Cable UK 3-Pin Plug (for EU orders we will remove this and replace it with an EU Plug)
• (1) Heater Stand
• (1) SQP Mini (Scoop + Tamp)
• (1) Wooden Brush
• (2) 15mm Mesh Screens for Bowl
• (2) Bottom Mesh Screens for Heater
• (2) Top Mesh Screens for Heater
• *Heater is heat cleaned & stress tested before being boxed - there might be a slight color change from this part of the process.

Spare Glass adapters/joints for the bowls are available here

Warranty

• The Pinch Hitter comes with a 100 day guarantee, if you're not happy with the kit you can return it within 100 days of purchase, providing it has been purchased directly or from an authorized retailer such as ourselves. 
• Please complete the warranty form linked in the Vapvana Shipping and Returns section. Vapvana will confirm the return eligibility with you then contact us to confirm, at which point you can return the kit to us for a full refund. You only need to cover the return shipping costs and ensure that the full kit is returned in its original packaging, clean and free of residues as detailed in the Vapvana returns linked above.  Once we have the kit back and have checked it is all there in appropriate condition we can issue the refund. 
• This policy does not cover any item lost, stolen, dropped or water damaged.
• The Screwball also comes with a Vapvana backed Lifetime warranty for the PID controller and heater coils. Please check out the information section "Lifetime warranty claims" for full details, this is displayed in the shipping and returns section linked above. There is also a link to the warranty/returns form on that page. 

PID Instructions

Please note

The joints on these bowls can be quite stiff to remove. We've found the best way is to grip the glass joint and bowl firmly then pull steadily apart, don't wiggle or twist. Once it's apart you can add a little o-ring lubricant, Flower Mill wax, Dynawax or similar to the o-rings to make it easier the next time. If you're really having trouble you can use thermal expansion to assist; place your Thermal or Ruby Twist housing onto the bowl for around 15 seconds to heat it up, then hold the Titanium part with an oven glove or towel and pull the glass joint out as described here.