V2 Globe Matrix - Bubbler - 14.4mm or 18.8mm

The V2 Globe Matrix bubbler is a high quality, medium to large glass bubbler with a minimalistic design. Contained inside is a matrix style percolator head which allows for free flowing inhales and great flavour. This style of bubbler has some of the lowest draw resistance we've encountered. Also available in Dark Glass.

Being upgraded, the V2 Globe Matrix bubbler has two intake ports, the top one is 14.4mm or 18.8mm (select your option from the menu) and a side port which is 10mm. The dual ports can be used together or one can be plugged with the provided stoppers, leaving you a single port for your setup. The additional port can also be used like a carb hole to clear your bubbler! 

Stability is a big bonus here too. Due to the large water capacity the Globe Matrix has a low centre of gravity, the 14mm female joint is also mounted centrally to keep most of the weight in the middle. When it does start to tip, unlike with regular bubblers which instantly tip and fall, the Globe Matrix bubbler rocks to the side then back into place, providing it isn't pulled too far.

Compatible with glass mouthpieces (one included) and vaporizer hose (included) this is a very versatile bubbler. We have ours set up with coloured Vinyl Hose which fits directly into the 14mm female mouthpiece joint on the 14mm version, however we strongly suggest using an Angled Whip Adapter as this can rotate in the glass joint and come out easily if you accidentally tug it, instead of pulling your bubbler off whatever surface it's on! Whip Mouthpieces for these are also available. 

We prefer vinyl over the provided Silicone as it's more flexible, collects less residue and is wider. The included tube is a little thinner, as are the hose adapters and we've found this limits the airflow. With a Vinyl hose and an upgraded adapter instead, it is super free flowing. 

Cleaning

• One of the easiest to clean
• Run the hot tap through the top intake hole to heat the bubbler and pull residue off the sides
• When hot and full of hot water hold the bubbler very tight and shake it. The water will swill around inside pulling off residue. 
• Rinse and repeat
• If you still find there is residue you can put a little ISO inside and swill it around, then rinse again with hot water. 

Included

• 1 x V2 Globe Matrix Bubbler Available with 14mm or 18mm Joints
• 1 x 14mm or 18mm Male Straight Glass Mouthpiece
• 1 x 14mm  or 18mm Male Angled Hose Adapter
• 1 x Small Whip Mouthpiece
• 1 x Length of Silicone Tube (11mm OD, 7mm ID, 2mm Thick) 
• 1 x 10mm Stopper for Side Port
• 1 x 14mm or 18mm Stopper for Top Port

Check out our the v2 Big Rig Stand for Globe bubblers for the ultimate Globe Setup!

Specifications

• Borosilicate glass
• FDA approved Silicone Tube
• Approx. 12cm x 14cm bubbler
• Clear Glass
• For the blind or partially sighted - you can fill this with between 300-500ml