Grade 1 Titanium Wire - 0.5mm 26AWG - Annealed
Grade 1 Titanium Wire - 0.5mm 26AWG - Annealed - Wire shot
  • Load image into Gallery viewer, Grade 1 Titanium Wire - 0.5mm 26AWG - Annealed
  • Load image into Gallery viewer, Grade 1 Titanium Wire - 0.5mm 26AWG - Annealed - Wire shot

Titanium Wire - Grade 1 - 24AWG - 0.5mm -10m spool

Regular price
£5.00
Sale price
£5.00
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

This is a discontinued line, we are looking for a replacement. 

High quality grade 1 Titanium wire, annealed for ease of coiling. Ideal wire for use in RDA's such as the TRVP V2 Blueprint or any RDA, RTA etc. Being grade 1 titanium it works very well with TI-TC temp control settings. We went with 0.5mm thick wire as it heats more evenly throughout the coil than thinner options. 

  • Grade 1 titanium 
  • 10m Spool
  • Annealed
  • 0.5mm - 26AWG 
  • Ti-Temp Control 

This wire has some oils from manufacture, before making coils we it we wipe it down using tissue or if necessary a wet sponge with a little washing up liquid, then rinse and dry it (though we haven't had to do this for a while, it seems to be cleaner than it was). Alternatively or additionally coils can be made then fired on temp control mode at 315C to flash off this residue.

Do not heat this wire on wattage or mech/bypass mode, Titanium wire should only be used with temperature control for safety reasons. Coil building should be done with care by people with at least a basic understanding of the system they're using. 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Pete
Crazywire indeed!

Good quality heavy gauge Ti, easier to coil than other Ti wire I've used.
Needs an anneal before you let the pressure off, and if you're tight coiling, don't forget to use a blowlamp to give it a good oxide layer. We don't want any roman candles... :@0