Dani Fusion - Metal Stem – Recommended Vape Supplies
BFG - Dani Fusion - Metal Stem
BFG - Dani Fusion - Metal Stem
BFG - Dani Fusion - Metal Stem
BFG - Dani Fusion - Metal Stem Pouch
  • Load image into Gallery viewer, BFG - Dani Fusion - Metal Stem
  • Load image into Gallery viewer, BFG - Dani Fusion - Metal Stem
  • Load image into Gallery viewer, BFG - Dani Fusion - Metal Stem
  • Load image into Gallery viewer, BFG - Dani Fusion - Metal Stem Pouch

Dani Fusion - Metal Stem

Regular price
Sale price
Regular price
Sold out
Unit price
Tax included. Shipping calculated at checkout.

The Dani Fusion by Battery Free Ganz (BFG) is an incredibly effective torch heated solution for vaporising your herb. Designed to provide highly efficient extractions, the Fusion can kick out huge clouds with top quality flavour, all while evenly cooking the chamber contents! The Fusion can also be used with The Wand induction heater, though torch heating is faster and more convenient in most situations. 

The Dani Fusion Metal Stem, like the Special Stem, provides maximum vapor cooling and excellent flavour from the full Titanium pathway. Being large and metal it does also wick heat away from the tip a little more than the wood or glass options causing it to cool a little faster. There is also an air port on the side which you can draw fresh air in with as desired. 



  • Adjustable airflow (MTL or DTL) 
  • 2 Heat Levels
  • Bi-Metallic Temperature Indicator (clicks once)
  • Single Heat Extractions Possible
  • 510 Drip Tip Compatible
  • Magnetic Stainless Steel Cap - IH Compatible
  • Stainless Steel (SS316) and Titanium (CP2) Vapor/Air Pathway
  • 0.14g Capacity (Can be crammed with more if desired)
  • CP2 Titanium Chamber, Stem and Cooling Helix
  • Hands Free Wand Heating (mostly, see notes)
  • Leather Carry Pouch (doubles as cap remover)



  • Dani Fusion - Metal Stem
  • Leather Pouch
  • O-ring pack


We can't write a better detailed description of the features such as airflow adjustment without directly copying their page, so would highly recommend everyone has a read of the Battery Free Ganz Dani Fusion Info Page, in particular check out the diagrams. We will provide a condensed version of the features to avoid repetition and elaborate on points which may be helpful. 



  • After loading don't screw the cap on tightly, gently does it. 
  • There are two Silver strips around the cap of the Dani Fusion. 
  • You can heat the smaller one for low temp and the thicker one for higher temp...
  • However we've found it most effective if you just heat both at the same time!
  • For a single heat cycle extraction count past the click...
  • With the Cyclone Triple Torch you can safely heat for up to 10 seconds past the click, with the single flame on the small ring and the dual flames on the large ring. 
  • Or... you can use a Big Shot Torch and heat both at the same time. 
  • If using a Big Shot, heat no more than 8 seconds past the click until you've learned your setup.
  • There is a decent amount of flexibility here, you have to really overheat it to cause combustion - something we haven't yet done! 


Induction Heating

  • The BFG Dani Fusion is compatible with the Ispire Wand
  • However...
  • We have found that the wand often doesn't initially activate unless you hold the Dani Fusion at an angle for around 5 seconds initially. 
  • When you have done this the Fusion can be left free standing in the Wand while it heats. 
  • We suspect this is something to do with thermal expansion in the cap as when it's warm, for a second heat cycle or load, there is no need to hold it at an angle initially as it activates automatically.
  • Also, your wand may activate more easily than ours which is one of the very first batch released!
  • We set our wand to 280C, allow a full heat cycle, then start another and after around 10 seconds begin to check for vapor. If you find a faster way to do it without combustion please let us know! We tend to just use torches as it's quicker and additional heat can be added more easily when needed. 

After use the Cap will be very hot, we suggest inserting the cap into the leather pouch, then holding that to unscrew it if you want to reload it again before it's cooled. Or unload it while it's warm (advisable). 


Other Notes

  • Great with solid material, break it up and sandwich it in your herb or leave a little on top of the herb. You can also use hemp cotton and load solids or concentrates onto this!
  • The Cooling Helix will rattle around inside when it's new. After a few uses the residue will take care of that for you.


Additional Parts Collection


Customer Reviews

Based on 3 reviews

Great device!
Perfect flavoursome vape, easy to use. The leather case is handy to keep it in whilst hot if out.
Order arrived perfectly and promptly. Will recommend!

Great vape

Works really well, greatly flavour and big clouds, plus stays hot for ages allowing really full extractions easily. Highly recommended.

Hits like a monster

Wow. This thing slaps hard.
Put through a mega globe or any other glass the fusion will serve you well with rich thick vapour. Literally a Dynavap on steroids