Settings for without bucket coil for use with Titanium bucket: TCR 260-315 @ 30W - 160-280C
This is the replacement coil for the HVT Sai TF Atomizer (the Saionara) for use with the titanium bucket. It is a ceramic donut coil sitting in a ceramic cup which we recommend using at 30w with tcr values of 260-315 depending on the mod box and baseline coil resistance reading. The tcr value of the ceramic coil itself is around 260. Since the coil closely contacts with the bottom of the bucket we stick to this tcr value and set the mod box temperature around 10 Celsius higher than needed to compensate for heat loss from the bucket and base of the atomizer. You can choose to purchase this with or without the replacement Titanium bucket (at a discounted rate) from the dropdown menu.
These should not be run higher than 23W for extended periods, stabilizing at around 15W during use is ideal. If you use wattage mode do not set this above 23W or the coil will need replacing sooner.
Please note all coils eventually need replacing however all the coils we stock are reliable and tend to last for months with care and proper use. Coils/crucibles should be cleaned with a burn off cycle then wiped before use to remove any oils left over from manufacture.
If you're unsure how to change the coil we've made a short YouTube video on the subject.