14mm/18mm Silicone Water Tool Adapter - V4/V5 – Recommended Vape Supplies
V4/V5 Silicone Adapter
V4/V5 Silicone Adapter
V4 Crucible Silicone Adapter in Green
V4/V5 Silicone Adapter
V4/V5 Silicone Adapter
14mm/18mm Silicone Water Tool Adapter - V4/V5
  • Load image into Gallery viewer, V4/V5 Silicone Adapter
  • Load image into Gallery viewer, V4/V5 Silicone Adapter
  • Load image into Gallery viewer, V4 Crucible Silicone Adapter in Green
  • Load image into Gallery viewer, V4/V5 Silicone Adapter
  • Load image into Gallery viewer, V4/V5 Silicone Adapter
  • Load image into Gallery viewer, 14mm/18mm Silicone Water Tool Adapter - V4/V5

14mm/18mm Silicone Water Tool Adapter - V4/V5

Regular price
£4.50
Sale price
£4.50
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

We designed these silicone water tool adapters to be very versatile, they are compatible with a large range of setups. This includes the V4 Crucible and V5 Micro Diffuser, allowing them to be used with both 14mm and 18mm female joint water tools! Simply replace the mouthpiece with this part. Being silicone these adapters are very resistant to heat build up so also function well as a mouthpiece. 

Compatibility 

  • V4 Crucible
  • V5 Micro Diffuser
  • Lightning Pen
  • StemPod Si Cooling stem or Stealth Stem 
  • Jet Stream Atomizer 
  • Sai/TAF and New Sequoia - When using a glass mouthpiece 
  • S&B Mighty/Plenty on metal flexi-tube
  • BAKx Metal or Glass Stems/Tubes - May need the included 14mm adapter piece from Lamart to be installed first as shown in the last image. 
  • Vaporizer hose/whip (fits our tubing from Elev8, others may not be compatible) 
  • 510 Atomizer setups with the o-ring mounted in the atomizer, not on the drip tip
  • Many others..

These function a little differently to glass adapters. Instead of fitting tightly into the female joint, which would make them difficult to remove and cause them to become stuck in the bubbler instead of staying attached to the atomizer, these act more like a gasket. The water tool sits on top and the silicone tapers away so only a small amount stays in contact with the glass allowing them to form a seal with the bubbler, without getting stuck. This system allows them to work with a wide range of bubblers. 

Please do not leave bubblers unsupported on top of this adapter. 

 

Includes

  • 1 x Silicone Water Tool Adapter
  • 14mm and 18mm Compatible 
  • FDA Approved Silicone 

 

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Dazza
P.S A fab new discovery....

...it also works as a mouthpiece or WPA for an Arizer ArGo! Fits the glass stem perfectly! Great for attaching a J-hook.

C
Chris
Squidgy grommet thingy

Attaches my Hubble bubble to my v5 nicely and works well as a mouthpiece as well cos I’m lazy

P
Paul
V4 silicone adapter

Works exactly as intended. The silicone creates an airtight seal when attached to my glass bubbler. Surprisingly it's not large or bulky despite it also fitting 18mm pieces too. It also isn't uncomfortable to use as a regular mouthpiece so you could easily replace your mouthpiece with it and he done. The only issue I found was because of the air hole is a straight tube it's more likely to get undesirables from your pockets. I did attempt putting a silicone cap over top of it but this made the cap more likely to fall out of the vape in my pocket.
Over all a quality product that not only is inexpensive but it also is far more durable and portable than any of the glass water tool adaptors out there.

N
Neb
Versatile Money Saver

As long as you have a hydotube already this replaces:
Bottomless banger for v4, m22, TRVP, and Sai.
14mm and 18mm glass adapters for v4.
All AVS airflow and mouthpiece upgrades.
Crossing 510 tether, and all carb caps.
And probably a lot more besides. Doesn't effect taste. Unbreakable. It's not even that bad as a mouthpiece, I just wish it felt a bit more teflon-like. Well worth the money and a lot more useful than the price would suggest.